Water Heater Repair Jackson MS Blog

Our blog is designed to give homeowners as much information on general plumbing repair tips, not just Jackson water heater repair advice.  Many home plumbing maintenance tasks homeowners can be well equipped  to take care of themselves.  Enjoy!

How to Flush a Jackson Water Heater

Posted by on Jan 17, 2014 in Water Heater Repair Jackson MS | 0 comments

Ok, so it is not a glamorous water heater upkeep task, but it does need a little cleaning up from time to time. Yes, today Water Heater Repair Jackson MS is going to instruct one on the best ways to eliminate a water heater. Some recommend doing so as soon as each to three years, we feel it is best to do so as soon as a year. Doing this is not a tough or time consuming task – heck, let the children provide a hand even.

Why Flush a Jackson MS Water Heater?

If it is last the advised life expectancy of the unit, it should have some type of routine flushing done. Doing this will clearly aide in having it run as successfully as possible, which likewise indicates conserving money on the expense of running the darn thing. That alone ought to be a sufficient reason we feel!

In regards to water heater maintenance, flushing it will get free of the buildup of mineral deposits that natural takes place inside the water tank. If one has actually ever had loud sounds, popping, gurgling, mini-explosion noises, that is a sign that there is too much sediment inside the tank. This flushing process will help see to it that the tank heats up water much more quietly.

Step 1. If it is an electric water heater, turn the power off in the main electric breaker box and turn the cold water supply off. If it is a gas heater, it is ok to leave the gas on – simply turn the water off. Though, turn the thermostat setting dial to the pilot setting (make a note to remember what it was initially set at though for later on). Then, whichever faucet the water heater supplies is closest has to be opened. This is typically much easier than opening the pressure relief valve, however one can do that instead.Water Heater Repair Jackson MS

Step 2. At the bottom of the water heater is a drain valve that a yard watering hose can be attached to. There might be a cover over it depending on the maker. Think about turning the heat to the pilot setting a number of hours before flushing it if one desires so the water isn’t going to be as hot when it is drained. If that is not an alternative that’s fine, simply see to it the yard hose made use of is in excellent shape to withstand the higher temperature water.

Run the hose outside away from the house or if the water has already cooled, one can drain the tank into containers.

Step 3. Open the water heater’s drain valve and begin draining the water. For whatever reason the drain valve is normally made of plastic, so if one has an older water heater (and one that has not been drained since before time began) it might stick a little. Simply beware to not break the plastic (which is why it would be good if the darn thing was NOT made of plastic).Water Heater Repair Jackson

Once the drain valve is open, also open the pressure relief valve on the unit. Water will (a minimum of it ought to if it pressure relief valve is working properly) flow some from it. Try to let is flow stable and not too fast so it stirs up the sediment in the water heater. We want the sediment to drain out the bottom from the hose.

If draining in a container, even if having the hose drain into a bucket beyond the garage or basement where the water heater is located, fill a bucket and let it sit to see if the water is clear or if there is sediment, which will usually look like sand in the bottom of the bucket. Just keep draining it till the water is clear.

Step 4. Close the drain on the bottom of the storage tank and close the pressure relief valve if it is still open.

Step 5. Turn the water supply on once more to fill the tank. As soon as it is full once more, slowing open the pressure relief valve again to get some excess air out of the tank. Then, open a hot water faucet in your house to get much more air out of the system.

Step 6. Let the hot water in the bathtub run until a full stream is streaming out. When that occurs, it is ok to turn the power back on if it is an electric water heater, or reset the temperature level setting for a gas water heater. Undoubtedly, turn the bathtub faucet off. In about 20 minutes, the hot water ought to be heated up once more.

There you go! Water Heater Repair Jackson MS is here to address any concerns you could have. Next take have a look at our post on what to do if one has no hot water.

Enhanced by Zemanta

Troubleshooting No Hot Water from a Water Heater

Posted by on Jan 15, 2014 in Water Heater Repair Jackson MS | 0 comments

Let us break down the discussion on why one could not have any hot water from the water heater into 2 different parts: having NO hot water and having LIMITED hot water.

No Hot WaterGas Water Heater Repair Jackson

In regards to having no hot water at all, Water Heater Repair Jackson MS suggests that it is probably because of one of the following 4 various possibilities (at least it is probably simply one). Below they are …

A Bad Pilot Light
Ideally this holds true since it is the simplest of the five to repair. First check to see that it is still lit. One could have to take an appearance at the owners manual (sorry men, but often we require to check out instructions) if you are having a hard time discovering where it is found. Manufacturers due tend to hide them nowadays it seems. And, to see exactly what the manufacturers directions are for relighting the pilot light.

Gas Line Leak
If one has a gas water heater, there could be a leakage in the line. If one has an electric one, clearly disregard this as a possibility. Some individuals have a hard time smelling gas, though my mom has an astonishing capability to smell it I vividly remember as a child. It most likely will have the smell of rotten eggs. If this is the case, all jokes aside, turn the gas line off if one knows where it is and call the gas company and/or a plumbing business if one does not reside in Hot Water Heater Repair Jackson MS’s service area. This is a significant problem that needs immediate attention!

A Bad Thermostat
This could be the problem for both not having any hot water, or just not having enough hot water. To be on the safe side we included it in this section though. See to it the thermostat dial settings have actually not been bummed or changed by accident. Our water heater is located in the garage and the happy fingers of twin children like to go exploring once in a while. If the
settings are what they generally are, turn the establishing some and see if it suffices. The thermostat can be changed for they do breakoccasionally.

A Bad Thermocouple
For gas water heaters, the thermocouple works in hand with the pilot light as a safety device. If the pilot light is out, it avoids gas from being switched on, so it is type of vital. Nevertheless, uncomplicated to alter if required. When the thermocouple begins to break, it “tells” the gas valve that the pilot light is out so it turns off the gas. The gas burner will not light then and the pilot goes out.

For electric water heaters, it makes use of a heating element inside to carry out the electrical current heating the water. These can likewise wear out and will result in lowered hot water.

Not Enough Hot Water

Sediment Buildup
If one is not in the habit of flushing the water heater tank periodically, like a minimum of once every couple years, sediment from the water will accumulate in the bottom of the tank. If one ever hears popping or banging noises from the tank, that is probably why. This will eventually minimize the heaters capability to make enough hot water. Regular flushing will generally resolve this issue. If the water at ones house is excessively hard, making use of a water softener will help fight an excess amount of sediment buildup too.

Various Other Possibilities
There might be an issue with the flame from the burner. Please ensure the area around and beneath the water heater stays clean from dirt. The water heater pulls air up from beneath for the burner. Natural gas flames will burn bright blue with a yellow tip, while propane are more bluish green on the body of the flame.

It might be the case that the tank size is just too little and unable to deal with the water heating demands, but obviously if it is a new trouble of inadequate hot water and ones usage level has not significantly increased, this will not hold true.

If any current repairs were made on the unit something could be crossed in regards to the electrical connections or the hot and cold water connects, however once again, very unlikely from a lot of plumbing companies.

There are various other possible causes, however for the sake of time here, Jackson Water Heater Repair just wished to share the most probably ones. Do not hesitate to let us know of any help needed!

Video Overview of Water Heater Repair Jackson MS

Posted by on Jan 9, 2014 in Plumbing Repair Jackson MS, Water Heater Repair Jackson MS | 0 comments

We just made a brand-new business video introduction for Water Heater Repair Jackson MS and we wanted to share it with you today. Do not hesitate to call us for any plumbing repairs and setups that you may require to have done at work or at home.